Latest bogie centre pivot bottom Tenders | Government bogie centre pivot bottom Tenders

Central Government And Public Sector

CTN :44253307

12 Mar, 2026 NA

Bilaspur - Chhattisgarh

Tender For auction sale of others - total qty.= 14 nos., description - scrap and unserviceable masonry structure of abandoned railway quarters at bilaspur-block nos.: 1465/1-2, 1467/1-2, 1469/1-2, 1491/1-2, 1112/1-2 & 935(11 units, type-iv), 1340(01 unit, type-v) and 1324/1-2(02 unit, type-ii) at officer's colony and near narmada orh, bsp with total plinth area of 1243.17 sq. meters.remarks:- (1) dismantling of the above quarters will be done by the purchaser at his own cost and risk and without causing any loss to any railway property. dismantling to be done below plinth level i.e. up to ground level before taking final delivery. while dismantling explosive should not be used. all the debris, unserviceable materials to be cleared from site to outside railway land by the purchaser. (2) any loss due to theft, accident etc shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railway. (3) any hidden material like rails, beam etc found during dismantling has to be returned back to stock holder/custodian. (4) all quarters boundary & fencing alongwith roadside chainlink fencing , tiebars and gi sheet with gate and pvc water tank, gi water pipe shhould not be offered for auction. (5)front fencing iron gate of all quarters should be handed over to custodian by purchaser before effecting the delivery. (6) dismantling of foundation brick works should be done by the purchaser up to ground level and debris should also be removed. (7) rail post and purlins are offered for auction. (8) materials(i.e. cut-rails, channel & tiebar etc.) kept /stacked in compound wall quarter nos. 1112/1 & 1465/1-2 are not included in above lot & also not offered for auction.special remarks - 1) due to complexity of lots, free delivery period against this lot will be 80 days as per railway board letter no. 2015/rs(s)/709/5 dt. 29/01/2016 under chapter no.-7.4. 2) material to be sold on as is where is basis & quarters will be delivered in nos.

corporations/Associations/Others

CTN :44241233

12 Mar, 2026 NA

Mangalore - Karnataka

Tender For auction sale of scrap acsr conductor - rabbit/ weasel,ms scrap rail /i beam/ ladder/ tubular poles etv.,,scrap 33kv, 11kv ug cable and pvc cable,scrap 25 kva transformers(alu.winding crgo core) without oil- conventional,scrap 63 kva transformers 3 star(alu.winding crgo core) without oil,scrap 100 kva transformers(alu.winding crgo core) without oil- conventional,scrap 250 kva transformers(alu.winding crgo core) without oil- conventional,scrap acsr conductor - rabbit/ weasel/coyote,ms scrap rail /i beam/ ladder/ tubular poles etc.,,acsr conductor scrap- rabbit/ weasel,rail pole /i beam poles etc.,,scrap 63 kva transformers(alu.winding crgo core) without oil- conventional,acsr conductor scrap - rabbit/ weasel

Central Government/Public Sector

CTN :44246604

20 Mar, 2026 30.70 Crore

Chandrapur - Maharashtra

Tender For supply of m s sheet as per is 1079 (unit - mass) , steel plates for structural and general engineering purposes (v2) , ms flat as per is 2062 50isf8 , hot rolled steel beam, column, channel and angle sections (v2) conforming to is 808 , rs joist / ms beam/ column 116mm x100mm , cgi ms sheet as per is 277 0. 63mm , ms rail 30lbs/yd , high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786

Central Government / Public Sector

CTN :44253295

06 Mar, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12232ms26k,98050175, quantity- 74.800 mts. scrap condemned unserviceable ms-gi-ci rusted,corroded,dusted mixed scrap of c and w,loco,p. way,signal interlocking material consisting of all type of sheets,boxes,ms high gauge,pipes,footsteps,rings,strips,filters,trusses,patch cut parts,gutters,drum clocks,distribution boards,u rack,boring rod,ms panel body,ms battery charger covers,hand cuffs,driver seat,hand cart,push trolley,packing strips,ms body of block instrument,ms boiler coil cut pieces,42 u rack ms body,ms collapsible gate,ms termination box,ms bathroom ventilator,ms body of data logger,ms heater coil,screen guard,nuts,bolts,lavatory doors,ms carriage doors,pins,rivets,links,rods,angle cut pieces,structural frames,brackets,drums,cocks,basins,wire meshes,wire ropes,water tank cut up parts,casings,corrugated sheets,filter top and bottom caps,clamps,washer plates,stands,frames,sheet cuts,plate cuts,joists,channels,bases,plates,flats cut pieces,vestibule frames,window,door,shutters,head stocks cut up parts,broken t and p items,racks,compensating rings,bindings,washers,dust bins,chains,berth strips,gate frames,iron furniture,motor bodies,screw rods,levers,flats,rod cut pieces,trolley wheels,gi ducts,glow sign boards,ms electrical scrap,building rods,packing strips,ms body of rru,air cooler empty bodies,cbf filter,corrugated sheets,drums,blower motor frames,ucb packing frames,under frame cut up parts,berth frames,supports,cylinder blower covers,valves,end shield covers,traction motor yokes,shafts,piston rings,gears,brake shoe heads,brake gear items,straps,cotters,springs,equalizing stays,fan hub,end shield,pinions,ms covers,signal arms,lc gate pipes,ladders,angles,signal booms,rounds,signal buckets,pulleys,fabricated posts,signal lamp structures,liners,screws,spikes,air brake cylinders,brake hangers,bss hangers,battery boxes,battery containers,junction and location boxes,sleepers cut pieces,axle counter empty box,dc-dp ips empty rack ,sge block instrument empty box ,reset counter box,gps clock ,42 v rack,transformer bay,ms chain pulley blocks,beam scale parts,idly cooker with steam generator body,wheel barrow,fry pan single burner,ms floor stand,ms sliders,ms body wet grinder,fry pan,jara,ms ips rack rifle safety chain,ms air pump,foot spray,antenna,spiral binding machine,ms man drill,trbc covers,hand cart push trolley,expresser fan guard,ms first aid box,hacksaw frame,tool box,tie bars,ci brake blocks,composite brake blocks,ci pulleys,buckets,ms gear wheels,gym equipment,roti maker,bicycle parts,axle box,bfr cut up parts,grills,mesh,gate wheels,girders cut pieces,collars,trolleys,foot plates,signal point rods and any other ms-gi-ci material present in the lot with or without attachments of nf,ss,rubber,nylon and plastic. ms pan mortars,wire claws,wire baskets,crow bars,jim crow,dip lorry,weld filling body,sleeper hooks,rail dollies,rail cutting frames,augers,pick axe,tongue for rails,spades,beaters,ballast rake,powrahs,rail cum road mono trolley,case tin,h.s.lamps,rail dolly clips,shovels,trolley wheels and similar gang man items of sorts and sizes,with or without attachments.fiber,glass,windows,frp glass windows,window frames of sorts and sizes,broken or unbroken,with or without attachments of nf window shutters. [aluminium - 2 percent] note- 1. nf material,axles,wheel discs,and rails or material not mentioned in the description,if found during the delivery are to be returned to railways. 2. track and track fittings running through this area are excluded. 3. nf and stainless-steel attachments are approximately 0.1 percent of the lot quantity. 4. gas cutting permitted to facilitate loading. location- bin no- 232, right side of road no- 2. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988.

Central Government/Public Sector

CTN :44212538

05 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. & u/s ferrous ms angle, channels from demolished platform/shed/fob with/without attachment of rails, ms flat, ismb, plate, round rods, doors, ismc, beam, angles, square tube with base, rolled steel joist, angles with rail attachments, tank cutting box/coach mfg fixture, pipes, fob materials, cut parts of girders, l angles welded with plates, bolts & nuts, mast for compressor, traversor dsl support mast in dismantled condition, fob materials consisting of angles, channels, supporting rod of beams and ms plates and with/without pipes/ fittings of all sorts and sizes, cut mast, anchor fitting assembly, pipe, bend pipe, tube rod/guy rod guy rod fitting, back angle, drop arm, cut mast top/bottom mast fitting, adjustor, ending cone, mast chair fitting, isolator set, double pole isolator,isolator handle,opening pipe, adaptor, number plate, tirfor,single pulley, automatic change over panel box,caution board, ohe mast scrap,ohe gi scrap such as various sizes of bolts, nuts, pipes, plates, hooks, with/without rope bracket, arm hook, electrical light mast, anti falling rod, small parts steel, stand u clamp, bolts, rivets,channels, portal booms, washer insulator cap, notice board, gi poles, ms flat, suspension clampnut,clamp, fob scrap in dismantled condition(mast), sleeve,tube, ball eyevarious sizes of bolts included with cut channels &fittings, cut pieces, isolator iron parts, boom, si clampand all other released ohe scrap/gi scrap, ms flat, ismb, plate, round rods, doors, ismc, beam, angles, square tube with base, rolled steel joist, angles with rail attachments, tank cutting box/coach mfg fixture, pipes, fob materials, cut parts of girders, l angles welded with plates, bolts & nuts, mast for compressor, traversor dsl support mast in dismantled condition, fob materials consisting of angles, channels, supporting rod of beams and ms plates and with/without pipes/ fittings with/without bricks or concrete adhearings in as is where is condition. pl no. 98030309. custodian: cdms-rsf-gsd-per. location: wall no 85 & 86. note: (1) cutting permitted to heavy nature items only. (2) loading by crane/jcb is also permitted. (3) if any non-ferrous materials found should be handed over to custodian.

Central Government And Public Sector

CTN :44180876

25 Mar, 2026 NA

Bongaigaon - Assam

Tender For supply of bogie centre pivot bottom .

corporations/Associations/Others

CTN :44135265

07 Mar, 2026 17.21 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of repl of main rails and raising of rails , tightening, repl. of all bolts, clits. , repl,re fixing of bushes , repl of spur gear assembly , repl of rack pinion , oh of reduction gear box , replacement of sector gear , alignment, grouting of tippling base rollers , repl,repairing of hopper grill , alignment of tipplers , repl,repairing of outboard stool , dismantling,repl of top pivot housing , repl of wooden block , matching of teeth of sector gear , re-fixing lock lever , repl of top stop locking gears assly , side beam fixing of tippler , alignment of motors of wagon tippler , servicing of spray line valve size 4 inch , servicing of spray line valve size 3 inch , servicing of spray line valve size 2 inch , oh of overhead spray pumps , servicing of spray nozzles , lifting, proper fixing of vf tray , changing, fixing of side packing , to provide the patches , repl of plates of vf tray, chutes , removal of foreign , fillings oil in gear box , servocoating,tightening, repl of damaged bolts , greasing of all the nipple point , repl of break shoe liner , repl of main rail beam of wagon tippler , provision of backup in main rail beam , work on central platform , repairing of main rail beam , repairing of rollers of coal spill plates , fab, erection of back support of vf mouth chute , fab. , installing of vf tray supports , repl of coal spill plate , repairing of pit platform of main rail beam , repl of damaged beam of vf , repairing of counter balance beam , repairing of mdu base structure , repairing of damaged split spur gear , fab. , of mouth piece of vf , erection of new fabricated mouth piece of vf , oh of hoisting system , oh of hopper spray pump, line , provision of hopper liners, in coal hopper of vf , fab. erection of coal hopper partition stool , raising and re-fixing of mouth piece of coal liner chute of vf , repl of back,side plate of mouth piece , to attend the coal leakage from top mouth piece , re-fixing,repositioning of side and back supports , repairing,reposition of side guards of mouth piece , repl of buffer block and buffer pads of counter balance beam , repl of brake drum of thruster brake assly , repl of input,output,intermediate pinion of gear box , fab. and erection of counter balance beam , repairing of wagon tippler plate form by cutting and welding , removing the fallen loaded wagon in pit , inserting the side beam pins in bracket , dismantling,removing the broken shafts of wagon tippler , installation of drive and adjacent intermediate shaft , cutting, fabricated and installation of resting outer rail beam bottom plate

corporations/Associations/Others

CTN :44104107

03 Mar, 2026 NA

Multi City - Multi State

Tender For auction sale of rcc pole scrap skeleton,released scrap i beam rail pole.,released scrap 2/4 pin, horizontal cross arms, clamps,etc.,,released scrap 1,2,4 acsr conductor.,released aluminium cable scrap.,scrap switch gear and plates,release scrap single phase energy meter (electro mechanical),release scrap single phase energy meter (high precision),release scrap single phase energy meter (static)(e waste),release scrap three phase energy meter [electro mechanical],release scrap three phase energy meter [high precision],release scrap three phase energy meter [static](e waste)

corporations/Associations/Others

CTN :44104106

02 Mar, 2026 NA

Gadag - Karnataka

Tender For auction sale of rcc poles skeleton,scrap i beam / ms rail pole,scrap iron 2pin/4pin/horizontal cross arm with tc sets,scrap gos,scrap acsr conductor,scrap copper control cable,scrap lt cable,scrap breaker, 11kv feeder box,scrap released ht metering cubicle distribution boxes, feeder piller boxes etc.,scrap ct & pt,scrap 11kv ab cable,scrap lt protection kit,single phase electro mechanical energy meters,single phase high precision meters,scrap static single phase energy meter e waste,scrap three phase metal body energy meter,scrap three phase energy meter high precesion (fibre body),t & p materials (iron of tables and chairs)

CTN :43928885

03 Mar, 2026 NA

Srinagar - Jammu And Kashmir

Tender For providing and fixing metal beam crash barrier (w- profile safety guard rail) made out of following m , manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, , providing and applying 2. 5mm thick road marking strips (retro-reflective) of specified shade / colou

Bogie Centre Pivot Bottom Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors